Shaft Sleeve
Shaft Sleeve
 |
 MINT Grafalloy EPIC 68 R Regular Flex Shaft 41 3 4 15˚ R9 R11 Adapter sleeve  US $59.99
|
 CALLAWAY IMIX SHAFT SLEEVE US $7.50
|
 Graphite Design Tour AD BB 7x Shaft With Razr Fit Sleeve US $220.00
|
 AUTHENTIC CALLAWAY RAZR FIT DRIVER FAIRWAY WOOD 350 SHAFT SLEEVE ADAPTER US $21.53
|
 ALDILA Tour VOODOO RVS6 shaft 65g Regular 425 w Taylormade RBZ sleeve R11s US $11.50
|
 new 2012 TaylorMade RBZ TP green 335 FCT Shaft Sleeve Adaptor R11S Rocketballz US $18.50
|
 Tour Issue Matrix Ozik HD8 XX Shaft with TaylorMade R9 TP FCT Sleeve R11 R11S US $199.99
|
 New 2011 TaylorMade R11 TP 335 FCT Shaft Sleeve Adaptor Left Handed R9 R11S RBZ US $23.88
|
 2012 TaylorMade RBZ 350 15 Degree Adjustment FCT Shaft Sleeve RH R9 R11 R11S US $23.99
|
 New 2011 TaylorMade R11 350 FCT Shaft Sleeve Adapter RH Also For All R9 Models US $23.99
|
 New Accra Tour Z M5 85 X Flex Shaft TaylorMade TP R11 FCT Sleeve R9 R11S RBZ US $159.99
|
 New Accra Tour Z M5 95 X Flex Shaft TaylorMade TP R11 FCT Sleeve R9 R11S RBZ US $159.99
|
 Replacement Shaft Sleeve Adapter for Titleist 910 Hybrid 910H 370 Hard to Find US $41.88
|
 Replacement Shaft Sleeve Adapter for Titleist 910 Drivers Fairway Woods 335 US $41.88
|
 TaylorMade Golf r9 TP 335 Shaft Sleeve Adaptor New Ferrule US $6.50
|
 TaylorMade Golf OEM R9 350 Shaft Sleeve Adaptor US $15.50
|
 Nike Golf 2011 VR II Pro Str8 Fit 335 OEM Shaft Sleeve Adaptor US $12.00
|
 Nike Golf 2010 VR Victory Red Str8 Fit OEM 335 Shaft Sleeve Adaptor US $15.50
|
 Nike Golf 2011 MachSpeed Str8 Fit OEM 335 Shaft Sleeve Adaptor US $10.00
|
 Cobra L5V OEM Shaft Sleeve Adaptor with Stainless Steel Screw New Ferrule US $24.50
|
 Cobra S2 S3 335 OEM Shaft Sleeve Adaptor Also Fits Cobra ZL ZL Encore AMP US $17.27
|
 Callaway Golf I Mix 335 OEM Shaft Sleeve Adaptor US $19.29
|
 Callaway Golf I Mix 350 OEM Shaft Sleeve Adaptor US $12.29
|
 New Callaway Razr Fit Driver Wood Shaft Adapter 335 Callaway Razr Sleeve US $49.99
|
 New Titleist 910 D3 Driver Wood Shaft Adapter 335 Titleist 910 D3 Sleeve US $42.99
|
 TP 335 15 Degree FCT Shaft Sleeve Adapter RH For 2012 TaylorMade R11S US $5.00
|
 Excellent Aldila PINK NV 65R shaft with Authentic Taylormade R9 sleeve Winn Grip US $89.00
|
 TaylorMade TP Aldila RIP Graphite Driver Shaft XS Tour Preferred R9 FCT Sleeve US $62.11
|
 TAYLORMADE R9 FUJIKURA MOTORE 60 G M SENIOR DRIVER SHAFT R9 FCT SLEEVE NEW US $74.88
|
 TITLEIST 910f RIP ALPHA 70X 3 WOOD shaft SPECIAL ORDER W FACTORY SLEEVE Aldila US $75.00
|
 TITLEIST 910D ALDILA NV 65X pulled driver shaft NO sleeve factory Titleist grip US $40.00
|
 TaylorMade R11S Aldila RIP Phenom Stiff Graphite Driver Shaft R11 FCT Sleeve US $26.98
|
 UST AxivCore 79 Black Stiff Fairway Shaft w Titleist 910 Sleeve SureFit Tip US $.99
|
 TaylorMade R9 R11 Long Drive UST 55 ProForce Stiff Driver 48 SHAFT w sleeve tip US $77.40
|
 TITLEIST 910 D2 D3 DRIVER PROLAUNCH RED STIFF SHAFT WITH AUTHENTIC SLEEVE US $48.93
|
 TITLEIST 910 D2 D3 STRONG 3 WOOD PROLAUNCH RED STIFF SHAFT WITH AUTHENTIC SLEEVE US $48.93
|
 TITLEIST 910 D2 D3 3 WOOD PROLAUNCH RED STIFF SHAFT WITH AUTHENTIC SLEEVE US $48.93
|
 NEW AUTHENTIC TAYLORMADE R11 ALDILA RIP RESCUE SHAFT WITH SLEEVE ADAPTER STIFF US $39.14
|
 Grafalloy Blue NT Prototype 65 S shaft TaylorMade R9 R11 w Sleeve Adapter US $51.00
|
 Aldila VooDoo SVS6 TM R11s TP Sleeve 335 Stiff Shaft Only US $49.95
|
 TITLEIST 910F FAIRWAY WOOD SHAFT ALDILA NV75 R AFTERMARKET SLEEVE US $.97
|
 TITLEIST 910 D2 D3 DRIVER SHAFT ALDILA NV 65 R SLEEVE TIP ATTACHED US $48.93
|
 AUTHENTIC TITLEIST 910F FAIRWAY WOOD SHAFT TOUR AD YSQ 65 R AUTHENTIC SLEEVE US $48.93
|
 TITLEIST 910 D2 D3 FUJIKURA MOTORE F3 60 STIFF FLEX SHAFT WITH ADAPTER SLEEVE US $129.99
|
 New TaylorMade R11 Fujikura Blur 60g M Senior Graphite Driver Shaft FCT Sleeve US $99.99
|
 MINT Taylormade TP Mitsubishi Fubuki 73 x5ct X Flex Shaft R9 R11 Adapter Sleeve US $74.99
|
 TaylorMade R9 R11Long Drive UST 65 ProForce X Stiff Driver 48 SHAFTsleeve tip US $72.00
|
 R11s Aldila RIP Phenom stiff 60g driver shaft w adjustable sleeve US $55.00
|
 TITLEIST 910 D2 D3 ALDILA RIP ALPHA 60 REGULAR SHAFT WITH ADAPTER SLEEVE US $134.99
|
 Shaft Adapter 335 TIP for Titleist 910 D2 D3 Drivers fairway wood golf sleeve US $37.00
|
 5pcs TP Ferrule 335 for TaylorMade R11S R11 R9 RBZ Shaft Sleeve FREE shipping US $9.99
|
 NEW TaylorMade Golf R11 TP 335 Adapter Shaft Sleeve FCT R9 R11s RBZ KB09 US $24.95
|
 TaylorMade RBZ R9 R11 Long Drive UST 55 ProForce Stiff Driver SHAFT15 SLEEVE US $79.80
|
 TITLEIST 910 D2 D3 ALDILA NVS 55 SENIOR SHAFT WITH ADAPTER SLEEVE US $109.99
|
 NEW TaylorMade RBZ Matrix Ozik Xcon 6 Stiff Shaft sleeve Driver US $59.99
|
 NEW Authentic Adams Golf Speedline Fast 12 LS Shaft Sleeve Adapter 335 US $37.49
|
 Taylormade Fujikura Blur shaft with adaptor sleeve stiff US $29.99
|
 Taylormade R11 Driver TP Shaft sleeve Aldila Tour Rip Alpha 60g 32 Regular US $99.99
|
 10 PCS Lot Sleeve Shaft Adapter 335 15 degree for TaylorMade RBZ R11s R11 R9 US $179.99
|
 Replacement Sleeve Shaft Adapter 335 15 degree for TaylorMade RBZ R11s R11 R9 US $22.88
|
 Cobra OEM S2 S3 335 Shaft Sleeve Adaptor Also Fits Cobra ZL ZL Encore AMP US $34.95
|
 NEW TaylorMade R11s Aldila Rip Phenom Stiff shaft with sleeve 60 US $89.99
|
 TITLEIST 910 D2 D3 FUJIKURA MOTORE F3 60 REGULAR FLEX SHAFT WITH ADAPTER SLEEVE US $129.99
|
 NEW Adams Speedline Fast 12 LS Adapter Shaft Sleeve KB17 US $38.95
|
 NEW ALDILA RIP ALPHA 60 X STIFF FLEX SHAFT WITH COBRA S2 S3 ZL ADAPTER SLEEVE US $99.99
|
 TITLEIST 910 D2 D3 DIAMANA BLUEBOARD 63x5ct X STIFF SHAFT WITH ADAPTER SLEEVE US $149.99
|
 Martix Ozik XCON 6 Driver Shaft X Flex w Taylormade R11 Sleeve US $149.00
|
 TaylorMade R9 R11Long Drive Graphite Design Regular Driver 48 SHAFTsleeve tip US $72.00
|
 Callaway RAZR FIT Driver FW 350 Adapter Shaft Sleeve with ferrule dct golf US $34.00
|
 TaylorMade r9 SHAFTSleeve Grafalloy S 3 wood TP or NON US $72.00
|
 NEW ADAMS FAST 12 LS FUBUKI ALPHA 60x5ct X STIFF FLEX DRIVER SHAFT WITH SLEEVE US $149.99
|
 TITLEIST 910 D2 D3 ALDILA RIP ALPHA 60 X STIFF SHAFT WITH ADAPTER SLEEVE US $134.99
|
 NEW NIKE 2012 VR S STR8 fit SHAFT ADAPTER SLEEVE US $59.99
|
 TaylorMade R9 R11 15TP Sleeve 2X Penley Stealth 65 XX Stiff Long Drive Shaft US $127.50
|
 TaylorMade R9 R11SleeveGraphite Design S Driver SHAFT US $72.00
|
 Fujikura Motore F3 60 S X Driver Shaft Titleist 910 D2 D3 OEM Surefit Sleeve US $189.99
|
 TITLEIST 910 D2 D3 ALDILA NV 65 STIFF SHAFT WITH ADAPTER SLEEVE US $109.99
|
 NEW PROJECT X GRAPHITE GOLF SHAFT 65 FLEX R11 R9 sleeve INSTALLED US $150.00
|
 Replacement Sleeve Shaft Adapter 350 15 degree for TaylorMade R11s R11 R9 RBZ US $18.88
|
 ProForce AxivCore 79 blue driver shaft Taylormade R11S R9 TP sleeve X stiff NEW US $89.99
|
Cone crusher in the late maintenance of attention to matters relating to the ten
1. Cone crusher at work Note:
(1) ore must be assigned to the disk in the middle, does not allow the ore directly into the crushing cavity. Because it is easy to crusher overload, the liner wear unevenly.
The right Ore condition:
a ore distribution plate uniformly dispersed in the crushing cavity.
b to roll into the ore can not be higher than the level of Mortar
(2) the largest crusher to the ore size, population size allowed is equal to mine, (the maximum size of the ore block ≤ 85% to the mining population size) or they will lead to:
a crusher production decreased.
b crusher damage some of the other pieces.
(3) No load start-breaker, the load will start the accident.
(4) parking, you must first stop to the mining machine, and so the ore has been broken into the crushing chamber after discharge, the crusher parking.
(5) crusher work should always check the pressure and hydraulic locking system, work station, identify problems and timely treatment.
2. Crusher output
Cone Crusher output, and feeding methods, feeding fragmentation, the degree of discharge block size, the physical and mechanical properties of the ore, temperature and other relevant, varied greatly, manufacturing output is given under the conditions specified in the broad throughput.
3. Rolling replacement Mortar
Mortar rolled into a U-shaped screws on the adjustment ring, between the injection of zinc alloy, so closely integrated with the new installation or replacement of rolling acetabular wall, in the 6-8 hours of work, check the fastening, U-shaped and re-tighten the screws.
4. Cone crusher wall replacement
Cone crusher with a cone head wall is fixed to the cone on the body between the two casting of zinc alloy, a new installation or a new wall replacement cone crusher working 6-8 hours, check the fastening, loose should be immediately found fastening.
5. Meshing
As the circular plate friction wear of the gear change of the gap in order to ensure the proper meshing gears must be covered with additional pads on the bottom, the gasket should be equal to the thickness of circular plate wear.
6. Bowl bearings and seals
Installation bowl bearings, taking care not to damage the rope Retaining Ring (use of hardwood and other objects between the support wire).
Assembly, should be scraping spherical bearing, crushing cone and the bowl to ensure that each sphere in contact with the inner cylindrical 0.35-0.5mm should ensure that the ring gap.
Bowl perfusion around the bush is of alloy nail bar fixed to the bowl bearing the shelves to prevent the bowl along the circumference side bearing any rotation.
Bowl bearing frame and the frame body with the key (pin) fixed, and if found in the work bowl bearing frame and the frame body with clearance must be handled immediately.
7. Cylindrical sleeve and the frame body for the third transition fit, in order to prevent the rotating bush, but also in the upper bushing into the zinc alloy tank, replace the bushings when the actual size of the frame body should be prepared, because After a long work crusher and handling the inevitable result of the cooperation with change. If the gap is too general lead lining to rupture.
8. Conical bush
Eccentric shaft sleeve and air together to study the injection of zinc alloy to prevent sleeve rotation, to be filled with all interstitial zinc alloy, zinc alloy due to thermal injection may cause the sake of the deformation of sleeve, so better check the size of the new cone set d1, d2 and B, should be timely correction is not correct, manufacturing spare parts, should be the actual size of the inner diameter of the eccentric sleeve to keep the original with the preparation.
9. Spring
(1) the role of the spring is when the crusher is not broken into the crusher to protect property is not damaged, so the spring pressure and crushing machine crushing force fit, when the crusher is in normal operation the spring is not moving, just fall into the crushing chamber overload when iron lift the crusher bearing sleeve spring is compressed the phenomenon occurred.
(2) cone crusher when the upper part of the normal beat, this is not a normal phenomenon must be carefully analyzed the causes and take measures to eliminate, if the error can not be compressed spring is not only normal work, but part of the damage that may occur because of compression spring will cause the breaking force increases.
Crushers beat the top result for several reasons:
A non-uniform, or to the mine to mine too
B to the mine in small pieces and powder containing excessive minerals or humidity.
C port of discharge gap is too small.
10. Exposed rotating machine parts, protective cover should be added, but the shield owned by the user.
About the Author
i am sunshine.welcome to visit our homepage,http://www.ucrushers.com